This 25mm ramp design high garage threshold kit has been designed to form a watertight seal between the garage door and the floor. The threshold will also prevent leaves, dust and debris from being blown under the garage door, thus ensuring a clean and dry environment.
This garage door threshold seals are suitable for use with manual and automatic up-and-over, sectional, roller shutter and side-hinged garage doors. The surface must be clean and free from dust, oil or grease.
Where the surface is painted a wire brush should be used on the area where the threshold seal will be fitted to remove loose paint. This product is not suitable for loose concrete or gravel.
Unsealed surfaces must be sealed prior to installation (What is an unsealed floor? An unsealed floor is a floor with a loose or powdery finish).
Due to coiling in transport, the threshold seal should be laid flat on a clean surface so that it returns to its original shape.
The kit includes:
- Threshold barrier
- Black adhesive (290ml)
- Fitting instructions
For best results the surface should be smooth and flat and devoid of bumps or troughs. Remedial action should be undertaken to rectify uneven surfaces prior to fitting the Threshold Seal.
Pencil or marker pen
6mm masonry drill bit
Electric screw driver